How to Clone a Motorola BPR40 Radio

Motorola BPR40 Cloning - How-To Guide

1. Set Up the Master Radio
   1. Turn off the radio
   2. Press and hold the Programmable Button 1 (the top programmable button) and turn the radio on. Keep pressing Programmable Button 1 until a beep is heard twice
   3. Release Programmable Button 1, the LED will turn red
2. Set Up the Slave Radio
   1. Turn off the radio
   2. Press and hold Programmable Button 1 and turn on the radio. Keep pressing Programmable Button 1 until 2 beeps are heard and then 3 beeps are heard
   3. Release programmable button 1, the LED will turn green
3. Cloning Process
   1. Connect the cloning cable to both the Master and Slave radios
   2. Press and release Programmable Button 1 of the Slave radio
   3. Within 2 seconds press and release Programmable Button 1 of the Master radio
   4. The LED on both radios will flash orange during the cloning process
   5. When completed, an "out" chirp will be heard on both radios
   6. Disconnect the cloning cable from both radios