How to clone a BPR40 with another radio

Set Up the Master Radio

  • Turn off the radio
  • Press and hold the Programmable Button 1 (the top programmable button) and turn the radio on. Keep pressing Programmable Button 1 until a beep is heard twice
  • Release Programmable Button 1, the LED will turn red

Set Up the Slave Radio

  • Turn off the radio
  • Press and hold Programmable Button 1 and turn on the radio. Keep pressing Programmable Button 1 until 2 beeps are heard and then 3 beeps are heard
  • Release programmable button 1, the LED will turn green

Cloning Process

  • Connect the cloning cable to both the Master and Slave radios
  • Press and release Programmable Button 1 of the Slave radio
  • Within 2 seconds press and release Programmable Button 1 of the Master radio
  • The LED on both radios will flash orange during the cloning process
  • When completed, an "out" chirp will be heard on both radios
  • Disconnect the cloning cable from both radios
×
FORGOT YOUR PASSWORD?
No worries. Enter your email and we'll email you instructions on how to reset your password.